Our website is currently under construction as we are enhancing it with new products.
Pollux Amaryllis
Wear Layer: 20 Mil
Width: 7”
Thickness: 5.2 mm (4.2 mm Core with 1 mm IXPE Backing)
Edge/End: Bevel/Bevel (Painted Bevels)
Finish: UV with Anti-Microbial Coating
Construction: Rigid Core Waterproof
Location: Below, On or Above Grade
Installation: Float
Available Mouldings: Quarter Round | Threshold/Reducer | Stairnose | T-Mould
Pollux Bellflower
Wear Layer: 20 Mil
Width: 7”
Thickness: 5.2 mm (4.2 mm Core with 1 mm IXPE Backing)
Edge/End: Bevel/Bevel (Painted Bevels)
Finish: UV with Anti-Microbial Coating
Construction: Rigid Core Waterproof
Location: Below, On or Above Grade
Installation: Float
Available Mouldings: Quarter Round | Threshold/Reducer | Stairnose | T-Mould
Pollux Cosmos
Wear Layer: 20 Mil
Width: 7”
Thickness: 5.2 mm (4.2 mm Core with 1 mm IXPE Backing)
Edge/End: Bevel/Bevel (Painted Bevels)
Finish: UV with Anti-Microbial Coating
Construction: Rigid Core Waterproof
Location: Below, On or Above Grade
Installation: Float
Available Mouldings: Quarter Round | Threshold/Reducer | Stairnose | T-Mould
Pollux Foxglove
Wear Layer: 20 Mil
Width: 7”
Thickness: 5.2 mm (4.2 mm Core with 1 mm IXPE Backing)
Edge/End: Bevel/Bevel (Painted Bevels)
Finish: UV with Anti-Microbial Coating
Construction: Rigid Core Waterproof
Location: Below, On or Above Grade
Installation: Float
Available Mouldings: Quarter Round | Threshold/Reducer | Stairnose | T-Mould
Pollux Goldenrod
Wear Layer: 20 Mil
Width: 7”
Thickness: 5.2 mm (4.2 mm Core with 1 mm IXPE Backing)
Edge/End: Bevel/Bevel (Painted Bevels)
Finish: UV with Anti-Microbial Coating
Construction: Rigid Core Waterproof
Location: Below, On or Above Grade
Installation: Float
Available Mouldings: Quarter Round | Threshold/Reducer | Stairnose | T-Mould
Pollex Hollyhock
Wear Layer: 20 Mil
Width: 7”
Thickness: 5.2 mm (4.2 mm Core with 1 mm IXPE Backing)
Edge/End: Bevel/Bevel (Painted Bevels)
Finish: UV with Anti-Microbial Coating
Construction: Rigid Core Waterproof
Location: Below, On or Above Grade
Installation: Float
Available Mouldings: Quarter Round | Threshold/Reducer | Stairnose | T-Mould
Pollux Juniper
Wear Layer: 20 Mil
Width: 7”
Thickness: 5.2 mm (4.2 mm Core with 1 mm IXPE Backing)
Edge/End: Bevel/Bevel (Painted Bevels)
Finish: UV with Anti-Microbial Coating
Construction: Rigid Core Waterproof
Location: Below, On or Above Grade
Installation: Float
Available Mouldings: Quarter Round | Threshold/Reducer | Stairnose | T-Mould
Pollex Lantana
Wear Layer: 20 Mil
Width: 7”
Thickness: 5.2 mm (4.2 mm Core with 1 mm IXPE Backing)
Edge/End: Bevel/Bevel (Painted Bevels)
Finish: UV with Anti-Microbial Coating
Construction: Rigid Core Waterproof
Location: Below, On or Above Grade
Installation: Float
Available Mouldings: Quarter Round | Threshold/Reducer | Stairnose | T-Mould
Pollux Mallow
Wear Layer: 20 Mil
Width: 7”
Thickness: 5.2 mm (4.2 mm Core with 1 mm IXPE Backing)
Edge/End: Bevel/Bevel (Painted Bevels)
Finish: UV with Anti-Microbial Coating
Construction: Rigid Core Waterproof
Location: Below, On or Above Grade
Installation: Float
Available Mouldings: Quarter Round | Threshold/Reducer | Stairnose | T-Mould
Pollux Petunia
Wear Layer: 20 Mil
Width: 7”
Thickness: 5.2 mm (4.2 mm Core with 1 mm IXPE Backing)
Edge/End: Bevel/Bevel (Painted Bevels)
Finish: UV with Anti-Microbial Coating
Construction: Rigid Core Waterproof
Location: Below, On or Above Grade
Installation: Float
Available Mouldings: Quarter Round | Threshold/Reducer | Stairnose | T-Mould
Pollux Yarrow
Wear Layer: 20 Mil
Width: 7”
Thickness: 5.2 mm (4.2 mm Core with 1 mm IXPE Backing)
Edge/End: Bevel/Bevel (Painted Bevels)
Finish: UV with Anti-Microbial Coating
Construction: Rigid Core Waterproof
Location: Below, On or Above Grade
Installation: Float
Available Mouldings: Quarter Round | Threshold/Reducer | Stairnose | T-Mould
